USER GUIDE : 1) INSTALLATION GUIDES
  2) FUNCTIONAL COLOR CHART
  3) MANUAL
 
1) INSTALLATION GUIDES
 
 

. Device and wire installations should not cause obstruction to the driver,
such as around the steering wheel, gear lever and pedals.

. Incorrect wiring may cause damage to the device as well as vehicle.

. Device installation should not obstruct Airbag activation.

. Device Must NOT be installed in locations with exposure to direct
sunlight.

 

Red wire in the wire harness must be connected to
the wire between the Instrument panel and fuse by
means of self stripping splice connector. Black wire
in the wire harness must be connected to chassis of
the vehicle by means of Fork terminal
 


Step 1 :: Look for the meter fuse location.
 


Step 2: Use self stripping splice
connector to tap into the wire
after the meter fuse.
 

Step 3: Attach the black wire to the vehicle chassis
using the fork terminal.




Step 4: Placement of the Power Check
 
REMOVAL OF BEZEL

Insert flat object between Bezel
and unit, slide from left to right to
loosen Bezel
   
  2) Functional Color Chart Click to view indicator chart
   
  3) Power Check Manual Click to view the manual
 
 
Copyright@2009 TechVolution. All Right Reserved. Terms of use / Private Policy